Recommended for the proper installation of the paint protection film. Kit includes auto wash, squeege, sleeve, microwipe towel, and isopropyl alcohol in proper ratio. The application squeegee is for use with paint protection clear urethane film. Low friction sleeve fits into squeegee and allows for smoother squeegee movement across film surface, minimizing potential scratching of film and vehicle surface, without this the film is easily scratched during application. Lint Free Wipe used to prep area using Cleaner and dry area after application. Any lint from a normal towel will blemish the clear film once cured. Alcohol mixture is used to bond the film to the paint surface.
Simple Installation Description First clean the surface by using the auto wash. Then a mixture of 35% isopropyl alcohol and 65% water is sprayed on the clean vehicle surface as well as the adhesive side of the film. This fluid allows the you to position the film on the vehicle without bonding immediately thus giving you up to 3 attempts to place the film properly, more importantly the alcohol allows the adhesive to flow out and gives the film a crystal clear look. Once in position, a firm plastic squeegee with a low friction sleeve is used to squeegee out the excess fluid and bond the film to the surface. Finally use the microwipe to dry the area and allow to cure.